Frequently Asked Questions
Q: Does the container fulfill the hygiene requirements for cosmetic products?
Yes, Fluid-Bag's manufacturing facilities are ISO 22000 certified and we have implemented the HACCP process control system. The inner containers comply with EU and FDA requirements. If necessary, the inner container can be irradiated to the necessary hygiene level.
Q: Can the Fluid-Bags be stacked?
The MULTI container can be triple stacked in the warehouse.
Q: What do I do with the Fluid-Bag after use?
The Multi pallet and transport bag are resuable. The only waste is the inner bag, which weighs about 4 kg plus the product residue inside. This component is usually sent for energy production.
Q: Do I need a Discharge Roller to empty the Fluid-Bag?
As a general rule, you need a Discharge Roller if you are working with more viscous products. This should however always be discussed case by case, since it also depends on the temperature and the flow characteristics of the product you are discharging, and for what purpose the product will be used.
Q: What is needed to operate the Discharge Roller/Automatic Discharge Roller?
The Semi-Automatic Discharge Roller is operated with compressed air. The capacity requirement for compressed air is a minimum of 6.5 bars / 95 PSI and 150 l / min.
The Automatic Discharge Roller requires 6.5 bars / 95 PSI and 500 l / min, plus a 3 phase 400 V electricity connection.
Q: Can I buy the whole solution (equipment, pumps, adaptors etc.) from Fluid-Bag?
Yes, you can buy the whole package from us. On request we supply everything you need to get the product out of the Fluid-Bag and out to the application point. This includes suitable equipment for discharge, pump, adaptors, systems, customer specific solutions, supply systems for packaging lines etc.
Q: Where can I get spare parts and service for my Fluid-Bag equipment and systems?
You can buy spare parts directly from Fluid-Bag in Finland, or from our distributor in the US. Please refer to the spare parts list included with your Discharge Roller and contact your Fluid-Bag representative. We also offer training and maintenance packages for owners of Discharge Rollers. Read more about Fluid-Bag's service packages and contact your closest Fluid-Bag representative.
Q: What kind of pump can I use?
If the product is high viscous, the pump must create a suction (vacuum) to pull the product out. A Discharge Roller is used, but it is still the pump that has to do the discharging work. If the product is more liquid, any kind of pump can be used, as the product will flow out of the bag due to the stretching.
Q: How do I connect the pump to the bag?
There are a number of adapters available. The choice depends on what pump will be used. For high viscous products, it is important that the connection is completely airtight. Please contact Fluid-Bag for more information.
Q: How do I fill? Should I fill from top or bottom?
The best way is always to fill from the bottom. By doing this you can fill without air contact, thus eliminating the risk of contamination. When filling from the bottom via the outlet pipe you need an adapter to connect the hose/pipe to the bag. For more liquid products, the bag can also be filled from the top if a Filling Station is used.
Q: Will the Fluid-Bag be strong enough for my needs?
The Fluid-Bag is the strongest flexible container on the market. It can take a direct hit by a fork lift truck without puncturing. It is also tested and approved for transport by road, rail and sea. Every single inner bag is pressurised and tested for leakage. The Fluid-Bag can even perform better than a rigid container in many cases thanks to the flexibility. Visit this section to watch our test videos.