Frequently Asked Questions

Q: Will the Fluid-Bag be strong enough for my needs?

The Fluid-Bag is the strongest flexible container on the market. It can take a direct hit by a fork lift truck without puncturing. It is tested and approved for transport by road, rail and sea. Every single inner bag is pressurised and tested for leakage. The Fluid-Bag can even perform better than a rigid container in many cases thanks to the flexibility. Visit this section to watch our test videos.

Q: Can the Fluid-Bags be stacked?

The Flexi container (single trip unit) can be double stacked in a warehouse or in a 20ft container (900 l version). The Multi container can be triple stacked in a warehouse.

Q: What do I do with the Fluid-Bag after use?

FLEXI: The pallet can be used for wood recycling or incinerated for energy. The transport bag is clean polypropylene and can be sent for material recirculation or incineration. The only waste is the inner bag which weighs about 4-5 kg plus the product residue inside. This component is usually sent for energy production.
MULTI: The pallet and transport bag are reusable. The only waste is the plastic inner bag, which weighs about 4-5 kg plus the product residue inside. Is usually sent for energy production.

Q: Do I need a Discharge Roller to empty the Fluid-Bag?

As a general rule, you need a Discharge Roller if you are working with more viscous products. This should however always be discussed case by case, since it also depends on the temperature and the flow characteristics of the product you are discharging, and for what purpose the product will be used.

Q: Can I buy the whole solution (equipment, pumps, adaptors etc.) from Fluid-Bag?

Yes, you can buy the whole package from us. On request we supply everything you need to get the product out of the Fluid-Bag and out to the application point. This includes suitable equipment for discharge, pump, adaptors, systems, customer specific solutions, supply systems for packaging lines etc.

Q: Where can I get spare parts and service for my Fluid-Bag equipment and systems?

You can buy spare parts directly from Fluid-Bag in Finland, or from our distributor in the US. Please refer to the spare parts list included with your Discharge Roller and contact your Fluid-Bag representative. We also offer training and maintenance packages for owners of Discharge Rollers. Read more about Fluid-Bag's service packages and contact your closest Fluid-Bag representative.

Q: What is needed to operate the Discharge Roller/Automatic Discharge Roller?

The Semi-Automatic Discharge Roller is operated with compressed air. The capacity requirement for compressed air is a minimum of 6.5 bars / 95 PSI and 200 l / min. The automatic Discharge Roller requires 6.5 bars / 95 PSI and 500 l / min, plus a 3 phase 400 V electricity connection.

Q: What kind of pump can I use?

If the product is high viscous, the pump must create a suction (vacuum) to pull the product out. A Discharge Roller is used, but it is still the pump that has to do the discharging work. If the product is more liquid, any kind of pump can be used, as the product will flow out of the bag due to the stretching. Click here to read more about typical set-ups.

Q: How do I connect the pump to the bag?

There are a number of adapters available. The choice depends on what pump will be used. For high viscous products, it is important that the connection is completely airtight. Please contact Fluid-Bag for more information.

Q: How do I fill? Should I fill from top or bottom?

The best way is always to fill from the bottom. By doing this you can fill without air contact, thus eliminating the risk of contamination. When filling from the bottom via the outlet pipe you need an adapter to connect the hose/pipe to the bag. For more liquid products, the bag can also be filled from the top if a Filling Station is used.

Q: How many Fluid-Bags can I fit into a 20 / 40 ft container?

Filled Fluid-Bags: 20 pc (900 l, stacked in 2 layers) Fluid-Bags in a 20 ft container and 20 pc (1000 l, 1 layer) in a 40 ft container.
Empty Fluid-Bags are shipped efficiently packed, and depending on the model we can fit from 75 to 100 complete Fluid-Bag units in a 20 ft container and from 180 to 200 in a 40 ft container.

Do you have any other question, or maybe would like to request more specific information? Use the contact button to get to the right page, and our team will assist you.