Grease in Fluid-Bags

A typical set-up for bulk grease handling with Fluid-Bag

A Fluid-Bag can be connected directly to a central lubricating system or to a grease gun at the point of maintenance.

Example of a typical set-up for a maintenance shop:


The Discharge Roller stretches the container and must be used in conjunction with a vacuum pump. It is the vacuum created by the pump that empties the container. In the case of grease, it is important the pump can create a suction to pull the grease out of the Fluid-Bag. The purpose of the Discharge Roller is to minimize the residue after discharge by bringing all the grease down to the pump, to achieve residue levels down to 0.5%.

Suitable pumps

Existing grease pumps can usually be used. Drum pumps with a pump tube can be inserted into the outlet of a Fluid-Bag. Larger pumps used on RAM presses for drums can be connected with a suitable adaptor to the bag outlet. These are some examples of grease pumps that have been used in previous cases:

Graco Fire-Ball 300/425
Ingesoll Rand Aro Grease Pump

Our technical teams are experts on grease and lubricant handling in Fluid-Bags

For new challenges, we support you in finding the right turnkey solutions. We will:

  • evaluate your current set-up for lubricants handling system
  • plan how to improve the lubricant handling using Fluid-Bag technology
  • suggest a solution to solve your challenges, including Fluid-Bag containers, equipment, pumps and other necessary accessories
  • simulate real life conditions and test our suggested Fluid-Bag solution
  • assist you during implementation and set-up until everything is running smoothly and the system works to maximum efficiency


For more information, please contact:

Henrik Kass
(Sales Manager, Lubes & Greases)